PreSonus FireStudio Project 10x10 FireWire Recording Interface

The FireStudio Project a complete 24-bit/96K professional recording system combining eight Class A XMAX microphone preamplifiers, 24-bit/96k sample rate conversion, and a zero-latency matrix router mixer.

The FireStudio Project is bundled with PreSonus Studio One Artist, our groundbreaking music creation program, and over 4 GB of virtual instruments, plug-ins, loops, and samples to get you started making music immediately.

Great for professional studio recording, live sound recording, performance, podcasting and more, the FireStudio Project is designed for flexibility and ultra-high sonic performance. Whether you need to record a live drum set, mic a guitar amp, or a complete band, the FireStudio Project is ready and more than able. With the new FireControl Mixer/Router you can send up to five individual mixes to different musicians during recording so that every band member can have a custom headphone mix.

The FireStudio Project can be daisy-chained with one or more FireStudio Projects or FireStudio Tubes to expand your number of recording inputs. Two and three units daisy-chained in any combination has been tested at PreSonus, however, the total number of units that can be daisy-chained depends on your computer’s processor speed, amount of RAM and computer configuration.

The FireStudio Project is the next-generation of the award-winning FP10/FirePod with the following improvements:

• Improved analog to digital converters (114dB dynamic range)
• Improved syncronization with JetPLL™ (jitter elimination technology)
• FireControl Mixer/Router to send up to five separate zero-latency stereo mixes to musicians during recording
• Three-segment LED input metering on all analog channels
• Internal IEC-based power supply
• PreSonus Studio One Artist bundle with Native Effects plug-ins and third-party instruments, loops, and applications.

8 XMAX Class A Preamplifiers

All XMAX preamplifiers are built with the same three elements:

High Voltage - The XMAX preamplifier runs on power rails of 30V. Most off the shelf op amp based designs run on power rails of 10V to 18V. Higher voltage power rails deliver more headroom, deeper lows, smoother highs and an overall fuller sound.

Discrete - No op amps. Only transistors, resistors and capacitors. Op amps add noise, coloration and harshness to a signal. Discrete designs deliver ultra low noise and transparency.

Class A - When a circuit is running in Class A mode the circuit is always in an "on" state operating at its optimal voltage requirements. Class A mode has zero crossover distortion and delivers purer, clearer and more musical sonics than class A/B designs which are found in most op-amp circuits.

The net result of the XMAX preamp design is high headroom, low noise, wide dynamic range and wide frequency range, and most importantly, musicality and transparency - smooth highs, solid deep lows, and everything in between.

Digital Converters and JetPLL Sync

Universal Control

Universal Control consists of the Launch window and the Device window. In the Launch window, you can set the sample rate, clock source, safe mode, buffer size (PC only), and WDM routing (PC only) for all connected FireStudio-series interfaces. Each device is listed at the bottom of the window, along with Device Window buttons that open each interface’s Device window.

The Device window provides level and routing controls for each FireStudio-series interface’s internal mixer, enabling you to set up zero-latency monitor mixes. Input and output metering have been optimized for ultra-fast screen display and minimum CPU usage, and you can give each interface a custom name. You can use any device in the chain as the master clock source, or you can slave the entire chain to an external digital device using any of the available digital inputs in the chain.

Studio One Artist—Plus Gigabytes of Creative Resources

Compare Studio One Artist and bundled extras to what comes with competing mobile interfaces:

• All-meat, no-bloat, music-creation software with an intuitive, practical, single-window interface
• Unlimited tracks, insert effects, sends, virtual instruments, buses, and effects channels
• Powerful drag-and-drop functionality
• Content browser with convenient sort options and preview player
• Full-featured, flexible automation
• Powerful real-time auto/manual time-stretching and resampling engine
• Control Link™ (advanced MIDI mapping made easy)
• Twenty 32-bit Native Sound™ plug-ins, including reverbs, amp modeling, and EQ
• Four new virtual instruments, including a sampler and an analog-type subtractive synth
• Ability to control the software mixer in any FireStudio-series interface to create zero-latency cue mixes.
• Gigabytes of third-party resources, including Native Instruments™ Kore™ Player with custom SoundPack (150 instruments), Native Instruments™ Guitar Rig LE, Toontrack™ EZDrummer Lite, and over 1.4 GB of loops!

Computer system requirements:
Below are the minimum computer-system requirements for your FireStudio Project.

• Windows 7, Vista, XP (32-bit and 64-bit)
• Intel Pentium 4 1.6 GHz processor or AMD Athlon 64 (Turion) (2.5 GHz or faster recommended)
• 1 GB RAM (2 GB or more recommended)

• Mac OS X 10.5.2 or later (32-bit and 64-bit)
• PowerPC G4 1.25 GHz or Intel Core Solo 1.5 GHz processor (2 GHz or faster recommended)
• 1 GB RAM (2 GB or more recommended)

• IEEE 1394 FireWire 400 Port
• Internet connection recommended
• DVD-ROM drive
• Internal or external 7200 RPM storage drive highly recommended

• Eight Class-A mic preamps

• 24-bit / 96K resolution

• Ultra-wide dynamic range

• Extremely low-noise design

• 10 simultaneous I/O