X10 Pro 4-Button Keypad, Ivory - Model XP4-I

Four rocker buttons used to send sequential ON/OFF X-10 PRO commands. The first command is the same Unit Code set on the XPT Base Transmitter and three sequentially above. Place the desired Keypad cover onto the XPT Base by inserting the tab on top of the Keypad under the notch on the XPT Base. Gently, but firmly press the bottom of the Keypad into place so that the pins on the back of the Keypad insert into the XPT Base socket. NOTE: The XPT, with a Keypad, does not switch any loads, it is a transmitter only.

• Four Button Keypad, On/Off

• X10 Pro XP Keypad

• The XP Keypads are designed to operate when attached to an XPT Wall Base Transmitter (sold separately)