X-10 Pro Master Dimmer Switch Model XPD3-IW

The XPD3 (3-way master/single pole) Incandescent Dimmer Module is designed to control incandescent loads with a rating of between 50W and 500W. Lamps rated below 50W may flicker or operate erratically. A Companion Switch (XPSS) is available for three and four-way operation. A removable decorative paddle is located on the Wall Dimmer Module for local ON/OFF and BRIGHTEN/DIM control. A power cutoff switch located only on the Wall Dimmer Module, directly below paddle, is provided for bulb changing. Rated at 120VAC, 500 watts. Includes both white and ivory colored switch plates. Uses standard Decora trim plates (not included).

• Controls incandescent loads 50 and 500 Watt (Max)

• Can be Single Pole switch or 3 & 4 way master control

• Must use Model XPSS for slave (sold separately).

• Supplied as White and Ivory

• Cannot be used to control appliances or fluorescent lamps