X-10 Pro Occupancy Sensor Model PMS02

The PMS02 Battery-Operated Indoor RF Motion detector is used for triggering lights and appliances based on motion or dusk/dawn. Designed to operate in conjunction with an X10 RF Base Transceiver-PAT01. Occupancy Sensor sends an X10 "On" signal when it detects motion and "Off" signal after a programmable time of up to 4 hours later. Additionally sends an "ON" signal at dusk to one Number Code higher than the motion code set followed by an "Off" at dawn.

• Sends wireless X-10 Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver

• The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring

• Signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home

• Built in photocell works like a watchful eye and will turn lights on and off at dusk and sunrise